Asi Switcher

ASI / IP Redundancy Switch (2:1 & 3:1) | ASIIPGuard

www.enensys.com

When combined with ENENSYS gateways, ASIIPGuard can provide a seamless switch-over between two gateways for DVB-T/T2 & ISDB-Tb networks. By default, the ASIIPGuard offers an ASI bypass mechanism in order to enable 100% of service availability in case of power outage. As an option, the IP bypass is also available. Thanks to the innovate Enensys design, up to 6 ASIIPGuard hot-swap modules can be inserted in a chassis. ASIIPGuard is ENENSYS innovative and dense ASI/IP redundancy switch that enables automatic 2:1 or 3:1 switch redundancy of ASI and IP feeds. As an option, it can provide seamless switching capabilities between two or three MPEG-2 TS, T2-MI or BTS streams. The ASIIPGuard aims at providing automatic redundancy switch between 2 or 3 MPEG-2 Transport Streams according to the validity of the incoming streams. Upon ETR290 errors, SFN errors, T2-MI, BTS errors or advanced MPEG-2 TS errors, ASIIPGuard switches automatically from the faulty input to the valid input.

Avenue 4455 ASI Protection Switch - PLURA

plurainc.com

The 4455 module is a fail-safe, bypass protection switch for critical ASI signals for broadcast or satellite applications. When a fault is detected in the primary input, and the secondary input is verified as good, the switch will activate, causing the secondary input to be switched to the module’s output. HDCP is not a Problem Many systems now require HDCP for video playback, regardless of content licensing. BEM-2-H can handle HDCP encrypted content with the added BEM-HDCP option. Muting Disable available with the purchase of option BEM-HDCP license and signed waiver. BrightEye Control Software Using BrightEye control software, you can easily time BrightEye Mitto into a video production switcher or router. While some cameras may have firewire out, using the video output and upconverting before distribution is preferable since longer cable runs can be achieved and quality is superior. Additionally, the BrightEye 90-FA’s reference input allows you to time the upconverted video output for use with a production switcher. The 4455 includes a passive, fail-safe path that ensures there is an output even in the event of a total power failure. The health of an ASI signal is determined by monitoring digital clock lock, packet presence, and PID presence.

VideoBRIDGE ASI Intelligent Redundancy Switch Kit - Sencore

www.sencore.com

The VB243 has two ASI inputs, each with taps to feed the included VB242 ASI input module with signals from two different production chains for real-time analysis of both signals. If any problem in any parameter is detected, pre-set rules apply and the unit will check the opposite input for the same failure and switch if no failure is detected. The VB243 ASI Intelligent Redundancy Switch Kit leverages Sencore’s proven VideoBRIDGE stream monitoring capabilities into a full, dual-path redundancy switch with autonomous operation. It provides deep signal analysis on both signal paths for unprecedented switching decision making. The VB243 system can be set up to be totally independent and make its own switching decisions, but can also be controlled from an NMS system with extensive Eii (External Integration Interface) parameters or SNMP triggers. All parameters can be controlled using the built-in web GUI which displays a visual overview of parameters used in switch decisions and system status. Reach out to our dedicated sales team with any questions, or get started with a free quote today.

ProSwitch | IP & ASI Streaming Redundancy Switch | Harmonic

www.harmonicinc.com

You'll get a fast, dense and reliable 2:1 MPEG-2 transport stream redundancy switch. Offering up to 16 2:1 IP switches or four 2:1 ASI switches in 1-RU, the high-density ProSwitch provides cost, power and space savings, helping operators to save on CAPEX and OPEX. Available for network and product redundancy (SFN adapters or T2-MI gateways) You can use this flexible 1-RU appliance for any architecture, including ASI-based headends and IP-centric networks. Available with Gigabit Ethernet or ASI interfaces, the ProSwitch is suitable for any type of architecture: from widely deployed ASI-based headends to IP-centric networks. The switch is equipped with dual power supplies/plugs to maximize service availability and maintains service delivery via a smart and configurable bypass mechanism on the GbE and ASI interfaces — even in case of power failure. Available on ASI and IP switches (from several milliseconds to several seconds) Web GUI for remote control SNMPv2 and v3 agent for NMS Ten GPI inputs Four contact closure outputs ... Monitor and test models for this environment ensuring that your ATSC MPEG-2 TS is properly secured.

4 x 1 3G HD SD SDI ASI Switcher • Link Electronics

linkelectronics.com

The LEI-504 is a four input video switcher that provides a convenient, low cost way to route high definition and standard definition serial digital signals. This switcher is compatible with 270Mb/s, 1.5Gb/s, and 3Gb/s Serial Digital Interface signals. The unit can also be used for ASI and SMPTE 310M (19.4Mb/s) signals; the re-clocking will automatically be turned off. The LEI-504 automatically equalizes the incoming SDI signal, compensating for greater than 1000 feet of cable at 270Mbps, greater than 250 feet of cable at 1.485Gbps, and greater than 100 feet of cable at 2.97Gbps. The signal is then re-clocked, with automatic rate detection for all popular data rates. The LEDs on the front panel will indicate the data rate of the output video. The LEI-504 is a Multi Definition (MD) SDI 4X1 video switcher capable of equalizing and re-clocking all common serial digital signals, since it supports both standard definition and high definition signals, this makes it the ideal SD/HD/3G video switcher for any application. Another unique feature of this unit is its ability to vertical interval switch when the inputs are synchronous. Vertical interval switching means that the switch takes place in the vertical interval of the video and no glitch will be seen in the active area of the video. The LEI-504 is a one RU chassis that is housed in the same case as the well accepted 700 series. 4 x 1 3G HD SD SDI ASI Switcher

4 x 1 3G HD SD SDI ASI Switcher with GPI Option • Link Electronics

linkelectronics.com

The LEI-504G is a four input video switcher provides a convenient, low cost way to route high definition and standard definition serial digital signals. This switcher is compatible with 270Mb/s, 1.5Gb/s, and 3Gb/s Serial Digital Interface signals. The unit can also be used for ASI and SMPTE 310M (19.4Mb/s) signals the re-clocking will automatically be turned off. The LEI-504G automatically equalizes the incoming SDI signal, compensating for greater than 1000 feet of cable at 270Mbps, greater than 250 feet of cable at 1.485Gbps, and greater than 100 feet of cable at 2.97Gbps. The signal is then re-clocked, with automatic rate detection for all popular data rates. The LEDs on the front panel will indicate the data rate of the output video. The LEI-504G is a Multi Definition (MD) SDI 4X1 video switcher capable of equalizing and re-clocking all common serial digital signals, since it supports both standard definition and high definition signals, this makes it the ideal SD/HD/3G video switcher for any application. Another unique feature of this unit is its ability to vertical interval switch when the inputs are synchronous. Vertical interval switching means that the switch takes place in the vertical interval of the video and no glitch will be seen in the active area of the video. The LEI-504G is a one RU chassis that is housed in the same case as the well accepted 700 series.