Ip Multicast Multiplexer

7881MUX-LITE-IP - Modular IP Multiplexer

evertz.com

Support is available for multiple input types, including SPTS, MPTS and unicast/multicast addressing. Controlled by the industry-leading VistaLINK® PRO CSM, the 7881MUX-LITE-IP offers grooming and re-multiplexing of pre-encoded content in a new single- or multi-program transport stream ready to be broadcast across DVB-S, DVB-T, DVB-C and IPTV networks.

MPEG DVB ASI over IP gateway Multiplexer - Thor Broadcast

thorbroadcast.com

- Supports ASI to IP one-way conversion - Supports one GE serial port and inputs 1 Gbps data - Supports UDP, unicast, and multicast mode - Supports a maximum of 8 ASI to IP conversion channels - Maximum bit rate in each channel is 108 Mbps; the maximum total bit rate is 800 Mbps - Keyboard and NMS operation ... ASI to DS3 or E3 (model dependent), DS3 or E3 to ASI, or bi-directional transport of DVB-ASI transport streams over a single DS3 carrier line ... 32 IPTV TS's INPUT TO 4 ASI OUTPUT MUX-Scrambler is a cost-effective, highly integrated IP multiplexer and scrambler The H-8ASI-IP ASI over IP Gateway is designed to carry up to eight standard DVB ASI transport streams over a gigabit Ethernet IP network. The unit can function as an IP stream transmitter, converting the ASI MPEG-2 transport stream into an IP stream for transport to multiple network locations. The IP transport stream can also be multi-cast to many different locations and devices. The signals can even be broadcast to computers running MPEG stream capture software such as VLC. The H-8ASI-IP can also be paired with the 2pcs H-IP-4ASI allowing seamless transport of up to 8 ASI signals over an IP network.

Multiplexers | AdvancedDigital Inc.

www.advanceddigital.com

2 independent multiplexed IP outputs (MPTS), unicast/multicast MORE INFO 5 independent multiplexers up to 512 IP inputs (MPTS/SPTS) up to 5 multiplexed IP outputs UDP/RTP, unicast/multicast 4 ASI inputs/outputs MORE INFO

IP/TS Multiplexer – DIGICASTCHINA

digicast.cn

Transport Stream Input 1*IP (RJ45,GigE) 120 x MPTS/SPTS, Unitcast/Multicast, RTP/UDP, ARP, ICMP, IGMP Protocol. 8*ASI input, BNC connector 8 x MPTS/SPTS, Unitcast/Multicast, RTP/UDP, ARP, ICMP, IGMP Protocol. Re-multiplex PID re-mapping (auto or manually available) PCR accurate adjusting Automatic generating PSI/SI table PID pass-through Transport Stream Output 450*IP STSP+8*IP MPTS OUT (RJ45,GigE) GENERAL OPTIONS Physical And Power Voltage: 110VAC±10%，50/60Hz; 220VAC±10%，50/60Hz Consumption: less than 25W Operating temperature: 0~45℃(operation), -20~80℃(storage) Dimensions: 482mm(W)*410mm(D)*44mm(H) Weight: 4.0Kg/pc MAX. input bitrate of IP is 800Mbps. Support UDP, RTP, ARP, ICMP, IGMP protocol etc. Up to 120 re-multiplexing channels.

IP multicast - Wikipedia

en.wikipedia.org

It sets up multicast distribution trees such that data packets from senders to a multicast group reach all receivers that have joined the group. There are variations of PIM implementations: Sparse Mode (SM), Dense Mode (DM), source-specific multicast (SSM) and Bidirectional Mode (Bidir, or Sparse-Dense Mode, SDM). The following are some common delivery and routing protocols used for multicast distribution: ... Unicast packets are delivered to a specific recipient on an Ethernet or IEEE 802.3 subnet by setting a specific layer 2 MAC address on the Ethernet packet address. The protocol allows the sender and receiver to join a key server where policies and keys are encrypted and distributed to the members of the secure multicast group. The key server can authenticate and authorize senders and receivers into a specific group, where the shared key is used to encrypt and decrypt traffic between members of the group. Reliable IP Multicasting protocols, such as PGM and SMART, are experimental; the only standards-track protocol is NORM (the standards-track revision of RFC 3941 is specified in RFC 5401, the standards-track revision of RFC 3940 is specified in RFC 5740).

MUXIP-10GE-2RU-V52 - High Density IP Re/De-Multiplexer

evertz.com

The MUXIP-10GE is a complete, flexible solution to concurrently demux and remux up to 128x IP inputs across 128x IP outputs. Flexible, supporting multiple inputs types including SPTS, MPTS, and Unicast/Multicast addressing. Controlled by the industry leading VistaLINK® PRO CSM, the MUXIP-10GE offers grooming and re-multiplexing of pre-encoded content in a new single or multi program transport stream ready to be broadcast across DVB-S, DVB-T, DVB-C and IPTV networks.