Nfc 200 Cable

Updated October 6, 2026

Overview

Product sourcing insights & recommendations

53 来源

The term NFC 200 refers to a high-performance, low-loss 50-ohm coaxial cable (specifically NFC-200), primarily manufactured by Chinmore Industry. It is designed as a functional equivalent to the industry-standard LMR-200, sharing the same 0.195-inch diameter but often utilizing a Bare Copper (BC) conductor for enhanced conductivity Chinmore Rokland.

Product Specifications & Structure

The NFC-200 stands out for its high-frequency signal integrity, making it a preferred choice over standard cables like RG-58 due to its lower attenuation Data-Alliance.

* Conductor: 1.12mm solid Bare Copper (BC) Chinmore.

* Dielectric: 2.95mm Gas Injected Foamed Polyethylene (FPE).

* Shielding: Double-shielded with aluminum foil and a 88% Tinned Copper (TC) braid, providing 90 dB of RF shielding Chinmore Fccable.

* Electrical: 50 Ω impedance; suitable for frequencies up to 5.8 GHz Fccable.

Market Trends & Insights (2024–2026)

The market for 200-series cables is currently driven by the expansion of wireless infrastructure and IoT deployments Alliedmarketresearch.

* IoT & 5G Growth: LMR-200 and NFC-200 are "sister" cables increasingly used in Helium miners, 5G pigtails, and Wi-Fi 6E antenna assemblies to maintain signal strength between routers and external antennas Data-Alliance Data-Alliance.

* Premium Material Preference: A key trend is the shift toward Bare Copper conductors (like in NFC-200) over Copper Clad Aluminum (CCA) to ensure better termination and long-term durability in outdoor environments Chinmore.

* Regional Standards: While "NFC" is a brand variant, it also aligns with French NF C standards for fire safety and marking in European installations, a critical factor for industrial compliance Fireproof-Cables Energy.

* Pricing: Wholesale prices for LMR-200/NFC-200 cables range from $0.99 to $1.50 per meter depending on volume, with pigtail assemblies (N-type to SMA) costing between $1.25 and $2.50 per unit Alibaba Alibaba.

Strategic Recommendations

* For Short Runs (< 15ft): LMR-200/NFC-200 provides a perfect balance of flexibility and low loss Data-Alliance.

* For High Interference: Prioritize cables with >85% braid coverage (like the NFC-200's 88%) to minimize EMI in dense IoT environments Chinmore.

Here is the analysis for NFC-200 and LMR-200 cables. You can proceed with:

Sources & References

53 sources cited · Verified industry data & reports

Coax Cable - NFC-200 NFC200

Chinmore

Technical data of product. Type of cable. NFC 200 COAXIAL CABLE. STRUCTURE. Conductor. Composition(No./mm). 1/1.12mm. Material. Bare Copper Wire.

LMR-200 Cable Specifications Compared to LMR-100

Data-alliance.net

The LMR-200 Low Loss ® is a 4.95 mm-thin radio frequency cable as flexible as RG58, but has better technical values, including lower attenuation ...

LMR-200 Coax Cable Specifications | PDF

Scribd

Key specifications include that it is a flexible 50 ohm cable with PE (F) dielectric, 0.195 inch jacket diameter, 2 shields, 10.5 dB attenuation at 1 GHz, 90 dB ...

LMR-200 Datasheet

Times Microwave Systems

... spec based on 3 foot cable with a connector pair* Finish* Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 ...

COAXIAL CABLES

Axon' Cable

APPLICATIONS. - Medical electronics,. - Audio equipment,. - Satellites,. - Miniaturised electronics. APPLICATIONS. - aircrafts. - helicopters. Page 8. CABLE ...

Low Loss N Male to N Male Cable Assembly using LMR- ...

Farnell

The Insertion Loss includes an estimated insertion loss of 0.1 dB per connector. Mechanical Specifications. Cable Assembly. Length. 48 in [121.92 cm]. Diameter.