Px 200

Updated August 31, 2026

Overview

Product sourcing insights & recommendations

25 来源

B2B Sourcing Guide: PX 200 Pneumatic Rotary Actuators

This guide synthesizes technical specifications, global market trends, and top wholesale sourcing options for the PX 200 model (typically a 2.00-inch/50mm bore rack-and-pinion design) Mcmaster.

#### 1. Technical Torque Specifications (PX 200)

The PX 200 is a high-torque pneumatic actuator designed for heavy-duty valve automation. Its torque output scales linearly with air pressure Mfcp Mcmaster.

Pressure (PSI)	Torque (lb-in)	Torque (Nm)	Efficiency Notes
40 PSI	~80.8	~9.1	Minimum operating threshold
80 PSI	161.6	18.3	Standard operating pressure
100 PSI	202.0	22.8	Nominal rated capacity
150 PSI	303.0	34.2	Maximum peak output

* Torque Factor: 2.02 lb-in per PSI (Double Acting configuration) Mcmaster.

* Rotation: Standard 90°, 180°, and 360° arcs with extruded aluminum bodies for corrosion resistance in harsh environments Smcusa Mcmaster.

#### 2. Global Price Benchmarks (2024)

* Wholesale Range: High-torque double-acting units on Alibaba.com currently range from $48 to $165 per piece, depending on certification and customization Alibaba.

* Economy Options: Single-acting spring-return units for smaller valves start at $15 to $28 per set for bulk orders (>1,000 sets) Alibaba Alibaba.

* Market Advantage: Pneumatics remain the most cost-effective B2B choice (lower CAPEX) compared to electric ($18B+ market) and hydraulic systems in 2024 Grandviewresearch Snsinsider.

#### 3. Sector Demand Trends (2024–2026)

* Oil & Gas: Represents 28.3% of global demand Grandviewresearch. Drivers include offshore investments and subsea automation, where explosion-proof pneumatic reliability is mandatory Credenceresearch Factmr.

* Water Treatment: Driven by infrastructure modernization and the adoption of ISO 5211:2026 standards. Demand is rising for fail-safe (spring-return) actuators in filtration and desalination plants to prevent contamination during power failures Businessresearchinsights.

* Smart Integration: A transition to "Smart Pneumatics" with IoT sensors is increasing, allowing for real-time torque monitoring and predictive maintenance cycles Strategicmarketresearch.

I have identified 32 products and 29 verified suppliers specializing in these actuators. Please refer to the attached files for the complete manufacturer list and technical catalog.

This sourcing guide provides technical specs and market trends for PX 200 actuators. You can continue with:

Sources & References

25 sources cited · Verified industry data & reports

Low-Speed Rotary Actuator

SMC Pneumatics

Tighten threads with the proper tightening torque. When installing the products, follow the listed torque specifications. 4. Before adjusting the angle by ...

Pneumatic Rotary Actuator Sizing

Motion & Flow Control Products, Inc.

Parker rotary actuators provide output torque up to 10,000 lb-in. The chart below shows the nominal torque output range of various actuator models at 100 psi.

HOW TO SELECT A PNEUMATIC ROTARY ACTUATOR?

YouTube · IntroMech

IN THIS VIDEO WE WILL DISCUSS ABOUT HOW WE CAN SELECT A PNEUMATIC ROTARY ACTUATOR/CYLINDER WITH THE HELP OF REQUIRED SYSTEM INPUTS. WE WILL ...

Pneumatic Rotary Actuator Manual | PDF | Valve

Scribd

The document provides installation, operation and maintenance instructions for a pneumatic rotary actuator. torque specifications. Tables provide mounting ...

Rotary Actuators

SMC USA

SMC's pneumatic rotary actuator units can achieve arc lengths of 90°, 180°, 190°, or even 270°, depending on the configuration. Rack and Pinion. A rack-and- ...

Low-Speed Rotary Actuator - content.smcetech.com - /

smcetech.com

If the rotation time exceeds 2s per 90°, however, the necessary torque and the kinetic energy are calculated with rotation time of 2s per 90°. Necessary torque ...

Px 200

Overview

B2B Sourcing Guide: PX 200 Pneumatic Rotary Actuators

Px 200 Pneumatic Rotary Actuator Wholesale Torque Specifications

Related Searches

Sources & References